Our projects

Structural engineering work we've recently completed for homeowners, builders and businesses.

Galvanised steel pipe frame on a concrete floor, with bolted pipe connectors, a weatherproof outlet box and a turf-wrapped pier

Certification of existing structure · Belmont WA

Temporary steel entrance frame certification in Belmont

Structural compliance certificate in Belmont WA: a temporary arched steel pipe entrance frame on portable concrete piers, checked for wind class N1.

Connection detail of a steel beam end seated in a brick/block column on a spreader plate, grout pad and chemical anchor bolts, drawn as light lines on dark grey

Structural design and drawings · Kallaroo WA

Steel beams to replace a garage pillar in Kallaroo WA

Structural drawings in Kallaroo WA: two steel beams replace the middle brick/block pillar at a garage opening, seated on the existing columns.

Close-up of an old red brick wall with a yellow tape measure across it, open vertical joints and eroded mortar

Structural inspection and report · Bayswater WA

Garage wall inspection and engineering advice in Bayswater

Structural inspection in Bayswater WA: masonry garage walls, a parapet and a single-brick wall by the neighbour assessed for a new timber-framed room.

Section through a retaining wall up to 1700 mm high, with limestone blocks in front of interlocking concrete blocks on a 2000 x 200 mm reinforced concrete base and a subsoil drain behind, drawn in light lines on a dark background

Retaining wall design · Bedfordale WA

1.7 m limestone and concrete block retaining walls in Bedfordale

Retaining wall drawings in Bedfordale WA: limestone and interlocking concrete block walls up to 1.7 m on a 2 m reinforced base, with subsoil drainage.

Verandah roof framing plan drawn as light lines on dark, with the wall plate along the existing building, the outer beam, a rafter line and diagonal strap bracing

Structural design and drawings · Fremantle WA

Verandah repair drawings in Fremantle

Verandah repair drawings in Fremantle WA: hardwood posts on the existing foundation, an LVL13 roof frame, strap bracing and fixings to the building.